Tuesday, April 7, 2015

Fresno might get its first protected cycle track!

I've been angrily hammering away on an article about the proposed Smart and Final project, but fortunately I found something in this weeks City Council Agenda that has temporarily soothed my nerves:
Approve a first amendment to agreement with BKF Engineers in the amount of $76,600 to provide professional engineering services for the evaluation of Class IV bicycle facilities between Downtown Fresno and the Tower District and the preparation of a feasibility study for a Class I bicycle trail along the Herndon Canal and Mill Ditch canal banks and to authorize the Public Works Director or designee to sign and execute the standardized agreement on behalf of the City (Council District 1, 3 ,4 and 7)
City Council
 So what is a Class 1 and a Class IV bicycle facility?

(a) Bike paths or shared use paths, also referred to as “Class I bikeways,” which provide a completely separated right-of-way designated for the exclusive use of bicycles and pedestrians with crossflows by motorists minimized.
(b) Bike lanes, also referred to as “Class II bikeways,” which provide a restricted right-of-way designated for the exclusive or semiexclusive use of bicycles with through travel by motor vehicles or pedestrians prohibited, but with vehicle parking and crossflows by pedestrians and motorists permitted.
(c) Bike routes, also referred to as “Class III bikeways,” which provide a right-of-way on-street or off-street, designated by signs or permanent markings and shared with pedestrians and motorists.
(d) Cycle tracks or separated bikeways, also referred to as “Class IV bikeways,” which promote active transportation and provide a right-of-way designated exclusively for bicycle travel adjacent to a roadway and which are protected from vehicular traffic. Types of separation include, but are not limited to, grade separation, flexible posts, inflexible physical barriers, or on-street parking.
Legislature

A cycle track, in Fresno!?

Sure, San Francisco has them....

  photo cycletrack6_zpst4zmmlkz.jpg

Streetsblog

 and Los Angeles has them (as of last week)...

  photo cycletrack5_zpsls4jhded.jpg

 Streetsblog

and cities like Chicago, Washington, New York and Boston have had them for years, but it looks like modern engineering has finally arrived in Fresno!

So where might they be built?
...an evaluation of Class IV bicycle facilities along Van Ness Avenue and Fulton Street between Divisadero Street and McKinley Avenue.

Van Ness Avenue and Fulton Street are the preferred connection between Downtown and the Tower for both motorists and people on bicycles. They each are one way, and were some of the first Fresno streets to get bicycle lanes added after construction (most new streets are designed with bicycle lanes in mind, but only within the last 5 years did Fresno start adding bicycle lanes to existing streets).

Because the Tower and Downtown were developed in the streetcar area, they are also the best place in the metro region to walk and bike for transportation. Further, with Fresno City College on the north end, it is by far the best corridor to install high quality bicycle infrastructure.

You can see the existing bike lanes, and project length here:

 photo cycletrack1_zpsqlxlkzvw.jpg

Today, Fulton and Van Ness are both wider than they have to be for the traffic they get.

Fulton:
  photo cycletrack2_zpsmj3dyqn1.jpg

Van Ness:
  photo cycletrack3_zpsrz8xc8yr.jpg

This is an excellent opportunity to fix this CALTRANS created disaster:

  photo cycletrack4_zpsma9xiq3n.jpg

Of course nothing is set in stone yet. This is just the first design step, although a required one, and there is plenty of room in the process for Council Stooge Brandau to kill yet another project. That is, let your council member know how strongly you support safe bicycle infrastructure so that their shoulders aren't shrugged when the inevitable attempt at sabotage arises.


Oh, and as for the other part of the funding:
The funds will also allow for the preparation of a feasibility study for the construction of Class I bicycle trail segments along the canal banks of the Herndon Canal and Mill Ditch between the Shields Avenue and First Street intersection to the McKinley and Clovis Avenues intersection.
Don't get confused about the name, the Herndon Canal does not run along Herndon. The proposed trail would go here:

 photo cycletrack7_zpsqx9pagol.jpg

Building trails alongside canals is a no-brainer. In this case, the council isn't the obstacle (as it doesn't threaten their precious car-lanes), but the irrigation district, which controls the right of way, isn't eager to have people share their land. 

 photo cycletrack8_zpsecwf6flf.jpg

 photo cycletrack9_zpsj91ndprx.jpg



If it was up to me, every canal in the region would go from looking like this:
 photo 20120206_154912_zpsybo0ovoh.jpg

To looking like this:
 photo canal render_zpsxax5um6p.jpg

Hopefully the feasibility study agrees.


Oh, and as for that post I'm writing on the Smart and Final project? I hope to have it up this week, if not Sunday. It's not good news though, not at all.

6 comments:

  1. OMG James is the developer goin to pull out?? WOOOW!! Cmon Fresno!! Hey bTw James look at the last topic comments that I wrote about the Uturns. I need help with that topic.

    ReplyDelete
    Replies
    1. Nope, it looks like they managed to win in plopping down a design that doesnt fit the general plan in any way shape or form.

      And yes I replied on the u-turns. I dont think a ban is needed or will ever happen there because of the residential homes that line that street which use the u-turn. Anyone making the right on red who doesn't yield to the u-turn is at fault.

      Delete
  2. Wooow, so the developers got their way once again? Hmmm. Thanx for the response on the U turn. Dang thats still puzzling to me about that intersection. Its veery similar to the T intersection of Granville and Perrin. Same situation.

    ReplyDelete
    Replies
    1. I cant think of anywhere in Fresno that has a median but bans u-turns, with the exception of time restrictions on Belmont

      Delete
    2. I do recall a "no u turn"sign I believe its Shepherd and...??Maple area?? I have to check.

      Delete
    3. Shepherd has (had) a lot of sections with 1 lane, so the no u-turn sign might have been placed so that larger vehicles did not attempt to make the turn and get stuck. You need two lanes + shoulder (or bike lane) for a truck to make a u turn.

      Delete